.Do you need to reset the company interval on her Toyota forklift? Read listed below to learn how to easily reset the company interval after you execute preventative maintain on your Toyota forklift.

You are watching: How to clear fault codes on toyota forklift

Q: how do ns reset the maintain hour meter top top a Toyota forklift?

A: In order come reset the maintain hour meter top top a Toyota forklift, an bureaucratic password must very first be gone into in bespeak to with the administrator menu normally inaccessible to general operators. From this menu, the maintenance hour meter can be set.

In bespeak to finish these steps, certain combinations need to be gotten in in the dashboard display shown below. For reference throughout these instructions, the 4 buttons used have actually been labeling A with D. That may aid to familiarize yourself v these instructions prior to attempting to complete the procedure.

*

Entering the bureaucratic password:

.

1. Press and hold buttons B and also D at the same time for2 seconds. A quick beep must sound both at the beginning of the 2 seconds and also after 2 seconds has actually passed.

.

2. Press button C within10 seconds. Another beep should sound. Repeat this by pressing button C as soon as morewithin10 seconds, hear again a quick beep.

.

3. In ~ 10 seconds, press and hold buttons B and D concurrently for2 seconds. Like before, a quick beep soundswhen B and D are very first pressed, yet now after ~ 2 seconds, repeated quick beeps sound. The administrator food selection should be displayed.

*

Shown over is an example of howthe administrator menu could look. To navigate the menu, button A moves under a perform of settings, buttons B and also C move from list to list of settings, and also button D selects a setup and moves to its separation, personal, instance screen.

.

Resetting the maintenance hour meter:

.

1. Locate the setting “MAINTENANCE HR” and also use switch D to select it. It should look comparable tothe food selection below.

*

.

2. To set the time because that the maintenance hour meter, buttons A through D have certain functions. Holding button A for an ext than 2 secs resets the existing value selected come 0. Switch B to reduce the collection time because that the meter, button C increases the collection time because that the meter, and also Button D returns to the administrator menu screen.

NOTE:Time have the right to be set in 10-hour increments native 10 to 200 hours, then in 50-hour increments native 200 to 2000 hours. It can not be set below 10 or above 2000 hours.

.

Locking the operator setting menu (DX model only):

.

1. Find the setup “MENU LOCK” and use button D to pick it.

.

2. Locking this menu boundaries the setting values that deserve to be adjusted by basic operators. Setting to “YES” will protect against the screen of the setup menu for an operator. Button B selects “YES,” switch C selects “NO,” and also Button D returns to the administrator menu screen.

See more: What Is 20 Percent Of 2000, What Is 20 Percent Off 2000 Dollars Or Pounds

For additional reading, we additionally offer our post on just how to perform simple forklift maintenance.