Instructions & Warranty

Thankyou for your purchase of this quality clock. The utmost care has gone into the design and also manufacture of your clock. Please review these instructions and store castle in a safe location for future reference.

You are watching: How to set a sharp alarm clock

FEATURES: huge 1.4" LED Display double Alarm High or Low display screen Brightness 9 Minute Snooze 9V Battery earlier up (Batery no Included)
*
POWER supply start by plugging in the strength cord right into a standard family outlet. The display screen will speed indicating it requirements to be set. SETTING the moment Press and hold the TIME button down to activate time setting. White holding down the time button, press the HOUR button to development to the correct hour. The pm indicator will certainly light when the hour is progressed into the pm time. While holding down the moment button, push the MINUTE switch to advancement to the exactly minute. Relax the TIME button when the exactly time is displayed on the display. Setup THE alarm 1/2 slide the alarm 1/2/DUAL slide move to alarm 1/2 position, then press and also hold the ALARM switch to activate alarm 1/2 setting. The alert 1/2 Indicator will certainly light as soon as the alarm 1/2 setup is activated. When the alarm 1/2/DUAL slide switch is top top the alert 1/2 position and also holding under the alert button, press the HOUR switch to advancement to the exactly hour. The afternoon Indicator will light once the hour is advanced into the afternoon time. When the alarm 1/2/DUAL slide move is on the alarm 1/2 position and holding down the alarm button, press, the MINUTE button to breakthrough to the correct minute. Release the ALARM button when the exactly alarm 1/2 time is presented on the display. Making use of THE alarm on slide the alarm ON/OFF move to the on position, climate slide the alert 1/2/DUAL slide switch to pick using alert 1, alert 2, or twin alarm. The alarm 1 indicator dot and ALARM2 Indicator dot will be lit follow to your choice. The alarm will certainly sound at the preset time. On slide the alarm ON/OFF switch to the OFF position to deactivate the alarm. The alert Indicator dot will certainly no longer be visible. Utilizing THE SNOOZE pressing the SNOOZE/DIMMER switch when the wake-up alarm is sounding will cause the alarm come stop and the alarm will sound again in ripe minutes. This will occur each time when the SNOOZE/DIMMER button is pressed.

PG 1



USING THE DIMMER if the alarm is not sounding, push the SNOOZE/DIMMER switch to readjust the HIGH or short seting to manage the brightness that the clock display. Note: The default is HIGH setting. BATTERY back UP turn the clock over and insert a 9V battery as suggested to administer battery back up. The battery will host the ALARM and also TIME setups until power is restored. There will be no display screen under battery power and also the ALARM will certainly sound in ~ the correct time. If over there is no battery and the power is interrupted, the screen will flash 12:00 and the ALARM and also the TIME will need to be reset. Care OF your CLOCK change the earlier up battery annually, or keep the clock there is no a battery once not in use. A soft cloth or a paper towel might be offered to clean your clock. Do not use any corrosive cleaner or chemical solutions on the clock. Keep the clock clean and also dry come avoid any kind of problems.

For Customer service Please speak to Toll free at1-(800)-224-0131 and also ask for Customer organization at x7546.Monday-Friday 9:00 am - 4:00 pm ESTPlease contact for assistance before returning the clock come the store.

One Year minimal Warranty

M.Z. Berger & agency warrants the original consumer purchaser that this product the it shall be totally free of defects in materials and workmanship because that one year native the purchase date of this product. Defects caused by tampering, not correct use, unauthorized modifications or repairs, immersion in water or abuse room not spanned by this warranty. If a defect spanned by this warranty occurs during the vouch period, wrap your clock carefully and also send it come the complying with address:

MZ Berger organization Center29-76 northern BoulevardLong Island City, NY 11101

You must incorporate a proof of Purchase, one of two people the original receipt or a photocopy and also a check or money order because that USD $3.00 to cover the price of handling. Likewise include your return address inside the package. M.Z. Berger will repair or replace the clock and return it come you. M.Z. Berger will certainly not be responsible for any loss or damage, including incidental or consequential damages of any kind; from any breach of warranty one of two people expressed or implied relatihg to the product. Since some states perform not permit the exemption or limitation of incidental or for this reason damages, this limitation may not apply to you.

Printed in China
Model SPC597

SHARP, registered in the U.S. Patent and also Trademark Office.

PG 2



IMPORTANT security INSTRUCTIONS

Read this instructions--All the safety and operating instructions have to be read prior to this product is operated.Keep these instructions--The safety and operating instructions have to be kept for future reference.Heed all warnings--All warnings top top the appliance and in the operating instructions need to be adhered to.Follow all instructions--All operating and also use instructions need to be followed.Do not use this apparatus near water--The appliance have to not it is in used close to water or moisture--for example, in a wet basement or near a swim pool, and the like.Clean just with a dry cloth.Do not block any ventilation openings. Install in accordance with the manufacture"s instructions.Do not install near any type of heat resources such together radiators, warm registers, stoves, or other apparatus (including amplifiers) that produce heat.Do not defeat the safety function of the polarized or grounding-type plug. A polarized plug has two chisels with one more comprehensive than the other. A grounding form piug has two blades and a 3rd grounding prong. The wide blade or the 3rd prong are noted for your safety. If the provided plug does not fit into your outlet, consult an electrician because that replacement the the obsolete outlet.Protect the power cord from gift walked ~ above or pinched particularly at the plugs, convenience receptacles, and also at the point where they exit from the apparatus.Only usage attachments/accessories mentioned by the manufacturer.Unplug the apparatus during lightning storms or once unused for long periods that time.Refer all servicing come qualified personnel. Servicing is forced when the apparatus has been damaged in any kind of way, such as power supply cord or plug is damaged, liquid has been flood or objects have fallen into the apparatus has been exposed come rain or moisture, does not operate normally, or has actually been dropped.Please store the unit in a an excellent ventilation environment.CAUTION: this servicing instructions are for use by qualified company personnel only. To minimize the danger of electrical shock, carry out not perform any servicing other than that consisted of in the operating instructions unless you space qualified to perform so.

WARNING: The mains plug is used as disconnect device, the disconnect device shall remain easily operable.Ξ This tools is a class II or dual insulated electric appliance. It has actually been design in such a means that that does not call for a safety link to electrical earth.Do no install this tools in a border or building-in an are such as a publication case or similar unit, and also remain a well ventilation conditions. The ventilation must not it is in impeded by covering the ventilation openings with items such as newspaper, table-cloths, curtains etc.

WARNtNG: The apparatus shall not be exposed come dripping or splashing and that objects filled through liquids, such together vases, shall not be inserted on apparatus.

Caution: changes or adjustments not specifically approved by the party responsible because that compliance can void the user"s authority to run the equipment.

WARNING: The battery shall not be exposed to excessive heat such as sunshine, fire or the like.

PG 3



*

This lightning flash and arrowhead in ~ the triangle is a warning sign alerting yu that "dangerous voltage" inside the product. CAUTION RISK OF electrical SHOCKDO no OPEN CAUTION: TO minimize THE hazard OF electric SHOCK, do NOT eliminate COVER (ON BACK). NO USER SERVICEABLE components INSIDE. Refer SERVICING to QUALIFIED business PERSONNEL.
*

The exclamation point within the triangle is a warning sign alerting friend of necessary instructions accompanying the product.

WARNING: TO mitigate THE risk OF FIREOR electric SHOCK, perform NOT EXPOSETHIS APPLIANCE to RAIN OR MOISTURE.

CAUTION: to PREVENT electric SHOCK do NOT use THIS(POLARIZED) PLUG with AN extension CORD;:RECEPTACLE,:OROTHER OUTLE~MSS.::fHEBLADES"CAN it is in FUI LY INSERTEDTO avoid BLADE EXPOSURE.

Please review this prior to operating her unit.

This maker compiies with part 15 the the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this maker must accept any interference received, including interference the may reason undesired operation.

See more: A Race Between Candidates For Elective Office Crossword Clue, Crossword Solver

NOTE: This devices has been tested and also found to comply with the borders for class B digitaldevice, pursuant to part 15 the the FCC Rules. These boundaries are draft to administer reasonableprotection against harmful interference in a residential instal!ation, Thia tools generates, uses.and can radiate radio frequency energy and, if not installed and also used in accordance with theinstructions, may cause harmful interference to radio communications. However, there is noguarantee that interference will not take place in a specific installation. If this devices does causeharmful interference come radio or television reception, which deserve to be determined by transforming theequipment off and also on, the user is urged to try to correct the lntetference by one or an ext of thefollowing measures:

Reorient or relocate the receiving antenna.Increase the separation in between the equipment and the receiver.Connect the tools into an outlet top top a circuit various from the to which the recipient isconnected.Consult the dealer or an skilled radio/0/ technician for help.

PG 4